Inspection and testing devices

High-accuracy digital pressure test gauge measuring from -10 to +10 inH₂O (-20 to 20 mbar) with a 0.1% accuracy.

Read more less

High-accuracy loop calibrator with a user-friendly interface, 0.01% precision, built-in 250Ω resistor, and 24V DC loop power for professional calibration needs.

Read more less

High-performance loop calibrator with "Quick Click" knob for easy one-handed operation, featuring 0.015% accuracy and 24V loop supply.

Read more less

The Fluke 700HTPK is a high-quality hydraulic test pressure kit capable of generating pressures up to 10,000 psi (690 bar), ideal for fast and accurate pressure testing.

Read more less

Cost-effective loop calibrator with mA sourcing, simulation, and measurement capabilities, featuring a 24V loop supply and easy-to-use interface.

Read more less

The Fluke 700HTPK2 is a premium hydraulic pressure pump kit capable of generating pressures up to 10,000 psi (690 bar), designed for fast and accurate test results.

Read more less

The Fluke 700MTH is a premium pressure transmitter test hose kit rated up to 5,000 psi, designed for easy connection to 1/4" female metric/BSP fittings.

Read more less

A combined digital multimeter and mA loop calibrator with 24V loop power supply, ideal for efficient troubleshooting and calibration.

Read more less

The Fluke 700PTPK is a high-quality pneumatic test pressure kit capable of generating pressures up to 600 psi (41 bar), ideal for fast and accurate pressure testing.

Read more less

The Fluke 700PTPK2 is a high-quality pneumatic test pump kit that generates pressures up to 600 psi (40 bar), ideal for fast and accurate pressure testing.

Read more less

Automated pressure calibrator with internal pump, designed for efficient and accurate pressure calibration up to 300 psi.

Read more less

Advanced handheld vibration tester with diagnostic technology to identify and prioritize mechanical issues without prior measurement history.

Read more less

High-precision pressure gauge designed to measure pressures from -14 to 10,000 PSI, suitable for industrial calibration applications with reference-class accuracy.

Read more less

External vibration sensor designed for use with the Fluke 805 Vibration Meter, enabling accurate measurements in hard-to-reach or hazardous areas.

Read more less

High-precision pressure gauge calibrator designed for measuring pressures from -14 to 5000 PSI, offering reference-class accuracy for industrial applications.

Read more less

Comprehensive vibration measurement solution combining the Fluke 805 FC Vibration Meter with the 805ES External Vibration Sensor for enhanced accessibility and accuracy.

Read more less

High-precision pressure gauge calibrator designed for pressure measurements from -14 to 3000 PSI with reference-class accuracy, ideal for industrial applications.

Read more less

High-precision pressure test gauge designed for measuring pressures from -12 to 100 PSI, ideal for industrial calibration tasks with reference-class accuracy.

Read more less

Reliable vibration screening device providing repeatable, severity-scaled readings of overall vibration and bearing condition.

Read more less

High-precision pressure test gauge designed to measure pressures from -14 to 30 PSI with reference class accuracy, suitable for industrial calibration tasks.

Read more less

High-pressure transmitter test hose kit designed for reliable pressure calibration, supporting pressures up to 10,000 PSI (690 Bar).

Read more less

High-precision differential pressure module designed for low-pressure measurements from 0 to 10 in H₂O (0 to 25 mBar), ideal for industrial calibration.

Read more less

Set of four magnetic probe tips for voltage test leads with 4 mm banana connectors, enhancing contact in limited access areas.

Read more less

Intrinsically safe pressure module designed for precise low-pressure measurements from 0 to 25 mbar in hazardous environments.

Read more less

High-precision gauge pressure module designed for measuring pressures from 0 to 1000 PSI (0 to 70 Bar), with a 3x burst pressure rating for enhanced safety.

Read more less

A set of three low-level AC current clamps measuring up to 5 A, ideal for accurate measurements on secondary current transformers.

Read more less

Low-level AC current clamp measuring up to 5 A, ideal for accurate measurements on secondary current transformers.

Read more less

Set of four flexible AC current probes (up to 3000A) for high-current measurements, compatible with Fluke 430 series.

Read more less

High-accuracy differential pressure module designed for measurements from -15 to 200 PSI (-1 to 14 Bar), featuring a 4x burst pressure rating for enhanced safety.

Read more less

High-accuracy differential pressure module designed for measurements from -5 to 5 PSI (-350 to 350 mBar), featuring a 4x burst pressure rating for enhanced safety.

Read more less

The Fluke i400s is an AC current clamp designed to extend the measurement capabilities of oscilloscopes and power quality meters, allowing for accurate AC current measurements up to 400 A without breaking the circuit. It features two measurement ranges (40 A and 400 A) with corresponding outputs of 10 mV/A and 1 mV/A, respectively, and is the only clamp available with a CAT IV 600 V / CAT III 1000 V safety rating.

Read more less

The Fluke i400 is an AC current clamp designed to extend the measurement capabilities of digital multimeters, allowing for accurate AC current measurements up to 400 A without breaking the circuit. It features a 1 mA/Amp output for easy reading and is the only clamp available with a CAT IV 600 V / CAT III 1000 V safety rating.

Read more less

High-accuracy differential pressure module designed for pressure measurements from -1 to 1 PSI (-70 to 70 mBar), featuring a 4x burst pressure rating for enhanced safety.

Read more less

High-accuracy differential pressure module designed for pressure measurements from -10 to 10 PSI (-700 to 700 mBar), featuring a 4x burst pressure rating for enhanced safety.

Read more less

The Fluke 1777 is an advanced three-phase power quality analyzer, featuring automatic power logging, troubleshooting, and a 20 MHz transient capture capability, making it ideal for comprehensive power quality analysis and system diagnostics.

Read more less

High-accuracy absolute pressure module designed to measure pressures from 0 to 300 PSIA (0 to 20 Bar), featuring a 4x burst pressure rating for enhanced safety.

Read more less

The Fluke 1736 and 1738 are advanced three-phase power quality loggers designed to automatically capture and log over 500 power quality parameters, providing comprehensive data for energy studies and power quality logging.

Read more less

High-precision gauge pressure module designed for industrial calibration, capable of measuring pressures from 0 to 10,000 PSI (0 to 700 Bar) with a 3x burst pressure rating.

Read more less

The Fluke 1775 is a three-phase power quality analyzer designed for automated power logging, troubleshooting, and transient analysis with 1 MHz transient capture and Fluke Connect® integration for real-time monitoring.

Read more less

High-precision gauge pressure module designed for measuring pressures from 0 to 5000 PSI (0 to 340 Bar), with a 3x burst pressure rating for enhanced safety.

Read more less

High-precision gauge pressure module designed to measure pressures from 0 to 3000 PSI (0 to 200 Bar), featuring a 3x burst pressure rating and advanced digital communication with Fluke calibrators.

Read more less

High-accuracy pressure module designed for gauge pressure measurement from 0 to 300 PSI (0 to 20 Bar), ideal for industrial calibration tasks.

Read more less

High-precision pressure module designed for gauge, differential, and absolute pressure measurement from 0 to 5 PSI (0 to 350 mBar), compatible with Fluke calibrators.

Read more less

High-precision gauge pressure module designed for measuring pressure from 0 to 1500 PSI (0 to 100 Bar) with a 4x burst pressure rating, compatible with Fluke calibrators.

Read more less

High-precision pressure module designed for gauge pressure measurement from 0 to 500 PSI (0 to 35 Bar), ideal for industrial calibration tasks.

Read more less

High-accuracy pressure module for gauge pressure measurement from 0 to 30 PSI (0 to 2 Bar), designed for Fluke calibrators.

Read more less

High-accuracy pressure module designed for gauge pressure measurement from 0 to 15 PSI (0 to 1 Bar), compatible with Fluke calibrators.

Read more less