In stock
Only %1 left
SKU
YT-827
As low as IQD  15,000
Payment methods available
Shop Soldering Gun For Best Price Online At Toolmart

Features:

  • Soldering iron in a traditional housing with a resistance heater powered directly from a power socket.
  • The simplicity of the design makes the device almost failure-free and with proper care of the tip, the soldering iron will serve for many years.
  • The heater's power is enough for the correct soldering of two copper wires, basic electronics in through-hole assembly technology, or for works related to joining elements of stained glass or jewelry using the tiffany method.
  • The high-quality, coated copper tip ensures faster heat accumulation and dissipation than in standard tips, and the friendly-to-touch two-component handle with an anti-slip element additionally improves the safety of use.
  • Power supply: 230v
  • Heater power: 60w, 80w
  • Hole depth for the tip: approx. 60 mm
  • Tip diameter: 6.1 mm, 7.0 mm

 

Dimensions of the tip attached to the soldering iron:

  • Length: approx. 85 mm, 95 mm
  • Diameter: 5.7 mm, 6.7 mm
  • Tip diameter: 1.5 mm

 

Other dimensions:

  • Total length with a bent cable: 270 mm, 290 mm
  • Handle length: approx. 130 mm
  • Power cord length: 140 cm


The soldering iron takes 2 to 3 minutes to heat up to 350 ° c.

How to take care of your grot

The tips of the yato soldering irons are covered with a material that reduces the oxidation of the tip. Long-term heating and mechanical damage gradually degrade the protective layer, then the tip oxidizes quickly, which results in problems with melting the solder. The tin instead of melting and sticking to the point, ball and falls. A proven method of taking care of the tip is its tinning. During the first heating of the soldering iron, put a little tin on the tip of the tip and remove its excess, e.G. With brass shavings. The tin layer formed in this way protects against oxidation. It is a good practice to tin the tip each time after finishing work.

Attention

Soldering irons powered directly from the mains socket should have a plug with a grounding pin and should be powered from a socket with connected earthing. Failure to ground the metal casing of the heater is a risk of electric shock, which at best will result in burns. All yato soldering irons have a grounded plug, which is connected to the metal housing of the heater.

 

Technical data:


  • Symbol: yt-8273, yt-8272
  • Ean: 5906083982736, 5906083982729
  • Brand: yato
  • Weight (kg): 0.3750
  • Master carton mc: 16
  • Pile: 448
  • Power [w]: 60, 80
Write Your Own Review
You're reviewing:Soldering Gun
Your Rating
Products from the same Yato
  1. SOCKET SET 1/2 12pcs
    Yato Tools
    Rating:
    0%
    ( 0 Reviews )
    SOCKET SET 1/2 12pcs
    IQD  40,001
  2. Socket set 1/2
    Yato Tools
    Rating:
    0%
    ( 0 Reviews )
    Socket set 1/2" 27 pcs
    IQD  100,000
  3. Socket set 1/2'
    Yato Tools
    Rating:
    0%
    ( 0 Reviews )
    Socket set 1/2'" 18 pcs
    IQD  85,000
  4. Socket set 1/2
    Yato Tools
    Rating:
    0%
    ( 0 Reviews )
    Socket set 1/2" 38 pcs
    IQD  135,000
Back to Top
Related Products