Sika AnchorFix 2 Tropical

Sika AnchorFix -2+ Tropical

ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS

DESCRIPTION

Sika AnchorFix®-2+ Tropical is a solvent and styrene
free, epoxy acrylate based, 2-component anchoring
adhesive for tropical climate conditions.

USES

Sika AnchorFix 2 Tropical may only be used by experienced
professionals.

As a fast curing anchoring adhesive for all grades of:
▪ Rebars / reinforcing steel
▪ Threaded rods
▪ Bolts and special fastening systems
▪ Concrete
▪ Solid masonry
▪ Steel

Prior to any application, the suitability of the Sika AnchorFix
Adhesive for the substrate in terms of the desired
bond strength, and for the prevention of surface
staining or discolouration, must be confirmed by testing
in a sample area. This is due to the wide variation
of possible substrates, particularly in terms of
strength, composition and porosity:
▪ Hard natural stone
▪ Solid rock

CHARACTERISTICS / ADVANTAGES

▪ Fast curing
▪ Standard guns can be used
▪ Medium to high load capacity
▪ ETA Approval available
▪ Suitable for cracked concrete
▪ Drinking Water certified
▪ LEED Attestation available
▪ Non-sag, even overhead
▪ Styrene-free
▪ Low odour
▪ Low wastage

Density

~1.60–1.75 kg/l (component A)
~1.45–1.50 kg/l (component B)
~1.65–1.75 kg/l (component A+B mixed)