Description

Features:

  • For optimum repair, improvement and protection against corrosion of metallic surfaces
  • Active corrosion resistance according to DIN 50021
  • Salt spray test at 528 hrsaccording to DIN 20021
  • Corrosion resistant zinc coating in hot-dipped colouring
  • Weather-resistant and protects against rust and salt
  • For aftertreatment of damaged hot-dipped galvanised parts
  • Can be spot-welded
  • Overpaintable with commercially available plastic resin paint systems. Test spraying is recommended.
  • Temperature resistant up to +400 °C
  • Zinc contents of pigments more than 98 %
  • Zinc contents dry film approx. 70 %
  • Parts to be treated must be clean, dry, free of grease and rust
  • Shake aerosol vigorously for approx. 2 minutes after mixing ball is heard
  • Cross spray from a distance of approx. 20 – 30 cm. One coat usually sufficient. For additional coats allow 5 minutes between coats.
  • Not suitable for over-laying with fillers
  • Not suitable as undercoat for PU, MS-polymer and hybrid sealing compounds

Read more

Product form

Zinc Spray - Bright L244 400ML | 62002104

Forch

SKU: 62002104

17,000 IQD

    Description

    Features:

    • For optimum repair, improvement and protection against corrosion of metallic surfaces
    • Active corrosion resistance according to DIN 50021
    • Salt spray test at 528 hrsaccording to DIN 20021
    • Corrosion resistant zinc coating in hot-dipped colouring
    • Weather-resistant and protects against rust and salt
    • For aftertreatment of damaged hot-dipped galvanised parts
    • Can be spot-welded
    • Overpaintable with commercially available plastic resin paint systems. Test spraying is recommended.
    • Temperature resistant up to +400 °C
    • Zinc contents of pigments more than 98 %
    • Zinc contents dry film approx. 70 %
    • Parts to be treated must be clean, dry, free of grease and rust
    • Shake aerosol vigorously for approx. 2 minutes after mixing ball is heard
    • Cross spray from a distance of approx. 20 – 30 cm. One coat usually sufficient. For additional coats allow 5 minutes between coats.
    • Not suitable for over-laying with fillers
    • Not suitable as undercoat for PU, MS-polymer and hybrid sealing compounds

    Read more

    • Multiple shipping options local and international

    • Original international brands

    • 100% secure payment methods

    • 24/7 support

    © 2026 TOOLMART

        Login

        Forgot your password?

        Don't have an account yet?
        Create account