Rugged multi-gas detector with IR CO2, O2, CO, and H2S sensors, external pump for remote sampling, datalogging capability, and ATEX certification for hazardous area use.
The Drager X-am 5600 is a compact and robust personal gas detection system designed for monitoring up to six different gases simultaneously in demanding industrial environments. This advanced multi-gas detector features specialized sensors for infrared CO2 measurement, oxygen (O2), carbon monoxide (CO), and hydrogen sulfide (H2S), providing safe and exact readings for critical safety applications. The detector is engineered with durable infrared sensors that offer exceptional stability and resistance to contamination, with a typical operational lifespan of up to eight years. The device features a water-tight, ruggedized construction with an integrated rubber boot, making it ideal for harsh and wet industrial conditions including offshore operations, confined space entry, and hazardous material handling.
Equipped with an integrated external pump capable of reaching distances up to 30 meters, the X-am 5600 enables pre-entry measurements and remote gas sampling without direct operator exposure. The intuitive two-button control panel provides simple operation, while the large display ensures readings are clearly visible at a glance. The detector incorporates advanced datalogging capabilities with infrared data readout, recording over 1000 hours of monitoring data with six gases at one-minute recording intervals. Multi-modal alarm systems include 360-degree visual indicators, audible alerts exceeding 90 dB at 30cm, and vibrating notifications to ensure operators are immediately aware of hazardous gas concentrations.
The Drager X-am 5600 holds comprehensive certifications including ATEX, IEC, CSA, and Marine Equipment Directive compliance, ensuring suitability for use across diverse industrial sectors. The unit operates for approximately 10-12 hours on a single charge with rapid charging in under 4 hours. The IP67 rating provides complete protection against dust and water ingress, while the retro-reflector label ensures visibility in dark or underwater environments. System integration is enhanced through compatibility with X-zone 5000 area monitoring, Drager CC-Vision software, and both X-dock and Bump Test stations for comprehensive gas detection solutions.
Key Features
- Robust water-tight detector with integrated rubber boot for extreme industrial environments
- Infrared CO2 sensor with high stability and contamination resistance lasting up to 8 years
- External pump with 30-meter hose length for pre-entry and remote gas measurements
- Advanced datalogging with infrared readout storing over 1000 hours of monitoring data
- Multi-modal alarm system with 360-degree visual, audible (>90dB), and vibrating alerts
- Simple two-button control panel with large display for easy operation and visibility
- IP67 water and dust resistant rating with retro-reflector label for visibility in dark/water
- Rapid charging under 4 hours with 10-12 hour operational battery life
- ATEX, IEC, CSA, and Marine Equipment Directive certifications for global compliance
- Dual gas inlet configuration at upper and front sides for flexible sampling options
Technical Specifications
| Specification |
Value |
| Sensor Types | Infrared CO2, Electrochemical O2, Electrochemical CO, Electrochemical H2S |
| Measurement Range CO2 | 0 – 5 Vol.-% |
| Measurement Range O2 | 0 – 25 Vol.-% |
| Measurement Range CO | 0 – 2000 ppm |
| Measurement Range H2S | 0 – 200 ppm |
| Resolution CO2 | 0.01 Vol.-% |
| Resolution O2 | 0.1 Vol.-% |
| Resolution CO | 2 ppm |
| Resolution H2S | 1 ppm |
| Response Time O2 | 10 seconds (T90) |
| Response Time CO & H2S | 15 seconds (T90) |
| Response Time IR CO2 | 20 seconds (T90) |
| Dimensions | 47 x 130 x 44 mm (1.85 x 5.12 x 1.73 inches) |
| Weight | 250 grams (8.8 ounces) |
| Operating Temperature Range | -20 to +50°C (-4 to +122°F) |
| Operating Pressure Range | 700 - 1300 mbar (20.7 to 38.4 inches Hg) |
| Operating Humidity Range | 10 - 95% relative humidity |
| Operating Time | Approximately 10-12 hours per charge |
| Charging Time | Less than 4 hours |
| Battery Type | NiMH rechargeable power pack |
| IP Rating | IP67 - water and dust resistant |
| Visual Alarm | 360-degree LED indicators |
| Audible Alarm | Multi-tone greater than 90 dB at 30cm |
| Vibrating Alarm | Yes - integrated vibration alert |
| External Pump Maximum Hose Length | 30 meters (98 feet) |
| Datalogging Capacity | Over 1000 hours with 6 gases at 1 minute recording intervals |
| Sensor Calibration Interval | Every 12 months |
| Sensor Lifespan | Up to 8 years typical operational life |
| ATEX Certification | I M1 Ex ia I MA, II 1G Ex ia IIC T4/T3 (Ga) |
| EN Standards Compliance | EN 50104, EN 45544, EN 60079-29-1:2007, EN 50271:2001 |
| IEC Certification | Ex ia I Ma, Ex ia IIC T4/T3 Ga |
| CSA Certification | Div.1, Class I, Groups A, B, C, D T4/T3, A/Ex ia IIC T4/T3/Ga |
| Marine Equipment Directive | Compliant with Directive 96/98/EC |
| Included Accessories | Crocodile clip, NiMH rechargeable power pack, charger, operation and maintenance manual |
| Gas Inlet Configuration | Dual inlets at upper side and front side for flexible sampling |
| Control Interface | Simple two-button control panel with large display |
| Housing Construction | Water-tight with integrated rubber boot for durability |
| Product Code | FS5600-001 |
Order Drager X-am 5600 Multi-Gas Detector CO2 O2 CO H2S at wholesale prices for companies and factories in Iraq and Middle East, get the best deals on bulk purchases, contact us today.
