50 Ton Capacity, Lock Nut Hydraulic Cylinder | HCL502

Features:

• Lock nut provides positive and safe mechanical load holding
• Low friction locking rings spin easy, save time and effort
• Designed to withstand 10% side-load up to 90% of maximum stroke
• Hardened surface resists side-loading and cyclic wear
• Overflow port as stroke limiter to prevent plunger blow-out
• Weather protected, inside and out
• Replaceable bearings enclose the plunger for support throughout the stroke
• Certified lifting eyes and base mounting holes

Specifications:

• Maximum Operating Pressure (bar) : 700
• Capacity Class (tonnage) : 50
• Maximum Cylinder Capacity Advance (kN) : 550
• Stroke (mm) : 50
• Collapsed Height A (mm) : 164
• Extended Height B (mm) : 214
• Return Type : Single-Acting, Load Return
• Plunger Type : Solid
• Material : Steel
• Cylinder Effective Area Advance (cm2) : 78,5
• Oil Capacity Advance (cm3) : 393
• Sideload Resistance of Maximum Capacity (percentage) : 10%
• Surface Treatment : Nitride
• Coupler : CR400 Coupler
• Weight (kg) : 17

Dimensios:

• Collapsed Height A (mm) : 164
• Collapsed Height With Optional Tilt Saddle A1 (mm) : 179
• Optional Tilt Saddle Addition To Collapsed Height A1 (mm) : 15
• Extended Height B (mm) : 214
• Outside Diameter D (mm) : 130
• Cylinder Bore Diameter E (mm) : 100
• Plunger Diameter F (mm) : Tr 100 x 4
• Base to Advance Port H (mm) : 24
• Saddle Diameter J (mm) : 71
• Saddle Protrusion from Plunger K1 (mm) : 2
• Saddle Maximum Tilt Angle Radius (degrees) : 5
• Lock Nut Height S (mm) : 25
• Base Mounting Holes Bolt Circle U (mm) :105
• Base Mounting Holes Thread V : M8 x 1,25
• Base Mounting Holes Thread Depth Z (mm) :10