If you are searching for Badia AC prices in Iraq, the most important point is not to compare price alone.
The difference between a 1 ton, 1.5 ton and 2 ton Badia split AC includes cooling capacity, electrical consumption, rated current, intended room size and installation requirements.
Toolmart currently offers three main models through its Badia Air Conditioners collection:
The current Badia range consists of inverter split AC systems with cooling and heating, T3-related hot-climate specifications and R410A refrigerant.
This guide focuses specifically on Badia AC prices in Iraq and explains what buyers receive as they move from one capacity to another.
Current Badia prices listed by Toolmart are:
| Model | Capacity | Current Price |
|---|---|---|
| MAJ12HINV | 1 Ton | IQD 535,000 |
| MAJ18HINV | 1.5 Ton | IQD 690,000 |
| MAJ24HINV | 2 Ton | IQD 855,000 |
The correct comparison should begin with the capacity your room actually requires.
A lower price is not automatically a better deal if the unit is too small for the space. Likewise, buying a larger AC than required does not automatically provide better value.
The current price of the Badia 1 Ton MAJ12HINV is IQD 535,000.
It is currently the lowest-priced model within the Badia range available through Toolmart.
The model provides approximately 3,500 watts of cooling capacity and 3,600 watts of heating capacity.
Rated cooling power consumption is approximately 1,030 watts.
This makes the one-ton model particularly relevant for customers who need a lower-capacity Badia inverter AC for smaller rooms, offices and other limited spaces.
When comparing the price of the one-ton Badia unit, it is important to look at the complete purchase package rather than the equipment price alone.
Toolmart's current product information states that the listed price includes installation and delivery within Baghdad.
For orders outside Baghdad, shipping charges are added according to the location and order conditions.
This means that a lower equipment-only price from another seller may not necessarily represent a lower total cost once installation and delivery are included.
The MAJ12HINV is the specific model number for the current one-ton Badia split AC.
Customers searching for Badia by model number can use the MAJ12HINV product page to review the live price and specifications before ordering.
The unit uses a Rotary T3 compressor and R410A refrigerant, with published maximum cooling operating conditions reaching up to 52°C.
The current price of the Badia 1.5 Ton MAJ18HINV is IQD 690,000.
This model provides approximately 5,280 watts of cooling capacity and the same 5,280 watts of heating capacity.
Rated cooling power consumption is approximately 1,670 watts, while rated cooling current is 7.3 amps.
It also uses a Rotary T3 compressor and R410A refrigerant.
The 1.5 ton Badia model sits directly between the one-ton and two-ton models in both price and capacity.
For buyers whose cooling requirements are higher than what a one-ton unit can reasonably provide but do not require a full two-ton system, the 1.5 ton category becomes the logical option to evaluate.
The additional price should therefore be viewed together with the additional cooling capacity.
The MAJ18HINV is the current 1.5 ton Badia inverter split AC model.
Its live price and full specifications can be reviewed directly on the Badia MAJ18HINV product page.
This is particularly useful for customers comparing the one-ton and 1.5 ton versions and trying to understand whether the additional capacity is required for their space.
The current price of the Badia 2 Ton MAJ24HINV is IQD 855,000.
This is the highest-priced model in the current Badia range on Toolmart.
It is also the highest-capacity option, providing approximately 6,600 watts of cooling capacity and 6,600 watts of heating capacity.
Rated cooling power consumption is approximately 2,300 watts.
Toolmart's current 2 ton product information states that the listed price includes installation and delivery within Baghdad.
Orders outside Baghdad are subject to shipping charges according to location and order conditions.
For customers comparing two-ton AC prices in Iraq, this should be included in the total purchase-cost calculation.
The MAJ24HINV is the current two-ton Badia inverter model.
It is designed for larger cooling requirements than the one-ton and 1.5 ton models.
Customers can review the latest price and technical information through the Badia MAJ24HINV product page.
The current price difference between the one-ton and 1.5 ton models is approximately IQD 155,000.
At the same time, cooling capacity increases from approximately 3,500 watts to 5,280 watts.
This does not mean every buyer should automatically purchase the 1.5 ton model because the price difference appears reasonable.
The room must actually require the additional capacity.
The current price difference between the 1.5 ton and two-ton Badia models is approximately IQD 165,000.
Cooling capacity increases from around 5,280 watts to 6,600 watts.
Rated cooling power consumption also increases from approximately 1,670 watts to 2,300 watts.
The higher purchase price should therefore be justified by a genuine requirement for additional cooling capacity.
The difference between the lowest-capacity and highest-capacity Badia models is currently around IQD 320,000.
That difference reflects a move from 3,500 watts of cooling output to 6,600 watts.
The products should therefore not be compared as though they serve the same room size or cooling requirement.
A useful way to compare the current range is:
| Capacity | Price | Cooling Output |
|---|---|---|
| 1 Ton | IQD 535,000 | 3,500 W |
| 1.5 Ton | IQD 690,000 | 5,280 W |
| 2 Ton | IQD 855,000 | 6,600 W |
The price increases as cooling capacity increases.
However, the correct purchase is not necessarily the most powerful system.
The correct purchase is the AC that matches the cooling load of the space.
Yes.
Within the current Badia range, the one-ton MAJ12HINV has the lowest purchase price.
However, the cheapest model is only economical if one ton is enough for the room.
If the unit is too small, it may need to work longer and still fail to provide the required comfort level.
The 1.5 ton unit may look attractive because it sits in the middle of the range.
However, "best value" depends on the actual application.
If a one-ton system is sufficient, paying more for unused capacity does not automatically create better value.
If the room needs 1.5 tons, choosing a one-ton model simply to save money can also be the wrong decision.
The two-ton price becomes relevant when the space genuinely requires more cooling capacity.
This can include larger rooms, halls, offices, retail stores and commercial areas.
In these applications, the useful question is not simply whether IQD 855,000 is expensive compared with the other models.
The important question is whether the 6,600-watt cooling capacity is the correct capacity for the space.
Purchase price is paid once.
Electricity consumption is an ongoing cost.
The published cooling power consumption for the current Badia models is:
For customers who expect to run their AC units for long periods every day, electricity consumption should be considered alongside the initial purchase price.
According to the current published specifications, rated cooling power consumption increases as cooling capacity increases.
However, monthly electricity use cannot be calculated from rated wattage alone.
Actual consumption depends on:
This is why capacity selection matters.
All three Badia models currently available through Toolmart are inverter systems.
The current collection does not list a separate non-inverter Badia range.
Therefore, when customers search for Badia inverter AC prices in Iraq, the current 1 ton, 1.5 ton and 2 ton prices are the main reference points.
The current Badia range includes T3-related specifications intended for hot-climate operation.
The one-ton and 1.5 ton models list Rotary T3 compressors, while the two-ton model also carries T3 operating specifications.
The current product information lists maximum cooling operation reaching up to 52°C under the specified operating conditions.
This is particularly relevant for customers comparing air conditioners for Iraq's summer temperatures.
The current Badia models use R410A refrigerant.
There is no separate additional purchase price shown for this refrigerant type.
It is part of the technical specification of the air conditioner.
Knowing the refrigerant type is still important for future servicing and maintenance.
All three current models provide both cooling and heating.
Published performance includes:
| Capacity | Cooling | Heating |
|---|---|---|
| 1 Ton | 3,500 W | 3,600 W |
| 1.5 Ton | 5,280 W | 5,280 W |
| 2 Ton | 6,600 W | 6,600 W |
This means buyers are purchasing a system designed for both summer cooling and colder-season heating.
For residential buyers, the correct process is to determine the required capacity first.
The Badia 1 Ton may suit smaller rooms.
The Badia 1.5 Ton may be considered for medium spaces.
The Badia 2 Ton is intended for larger cooling requirements.
The final decision should be based on the room's actual heat load.
Office cooling requirements can vary significantly even between two rooms with similar floor area.
Employee density, computers, monitors, glazing and long operating hours can increase heat load.
Businesses should therefore compare all three sizes through the Badia collection instead of automatically using the same capacity in every office.
Retail stores often experience higher heat loads because of:
The correct price comparison should therefore begin after the store's cooling requirement has been identified.
Companies purchasing several air conditioners should avoid viewing each unit as an isolated transaction.
A business may require several one-ton units, several 1.5 ton units and several two-ton units across different offices or branches.
Keeping those purchases within one product family can make equipment management easier.
The Badia collection provides one page where companies can compare the available capacities.
Wholesale procurement does not mean that every unit needs to have the same capacity.
A business can use all three Badia sizes across one project while maintaining a consistent brand family.
This can simplify:
Contractors should calculate the full project requirement rather than evaluating one unit at a time.
For example, a project may need:
The total project cost should then include equipment, installation, delivery and any location-specific logistics.
Toolmart's current Badia product pages state that listed prices include installation and delivery within Baghdad.
This is an important point when comparing offers from different sellers.
A competing price may initially appear lower but may not include the same services.
For orders outside Baghdad, Toolmart currently states that shipping charges are added according to location and order conditions.
Therefore, there is no single fixed delivery price that applies to all Iraqi governorates.
Customers should confirm the final delivery cost before ordering.
Toolmart's Badia page positions the products for delivery across Iraq.
For businesses, contractors and larger orders, consolidating the requirement into one order can also make shipping and receiving easier to manage.
The prices in this article reflect the current Toolmart listings used for this content.
Product prices can change.
For this reason, the Badia collection page should always be used as the final live pricing reference before ordering.
A proper price comparison should include at least:
Looking only at the product price gives an incomplete view of the real cost.
The current lowest-priced model is the Badia 1 Ton MAJ12HINV at IQD 535,000.
It is the cheapest in purchase-price terms.
It is not automatically the best model for every room.
The current highest-priced model is the Badia 2 Ton MAJ24HINV at IQD 855,000.
It is also the highest-capacity model in the current range.
Instead of searching for the lowest Badia price overall, search for the best price within the capacity your room requires.
If a room needs two tons of cooling, comparing the price against a one-ton system is not useful because the products solve different cooling requirements.
Start with cooling capacity.
If one ton is enough, there is no reason to buy two tons simply because it is more powerful.
If one ton is not enough, choosing it only to reduce the initial price can also be a poor decision.
Capacity should come before price.
| Capacity | Model | Current Price | Cooling Output | Cooling Consumption |
|---|---|---|---|---|
| 1 Ton | MAJ12HINV | IQD 535,000 | 3,500 W | 1,030 W |
| 1.5 Ton | MAJ18HINV | IQD 690,000 | 5,280 W | 1,670 W |
| 2 Ton | MAJ24HINV | IQD 855,000 | 6,600 W | 2,300 W |
This table makes it easier to compare purchase price together with capacity and electrical demand.
All three current capacities can be compared through the Badia Air Conditioners collection at Toolmart.
From the collection page, buyers can open each product and review its latest price and specifications before placing an order.
Toolmart brings the current Badia models together within one dedicated brand collection.
This allows customers to compare:
For companies and contractors, the ability to compare multiple capacities within one supplier can also make procurement more efficient.
Current Badia Split AC prices on Toolmart start at IQD 535,000 for the 1 Ton MAJ12HINV, rise to IQD 690,000 for the 1.5 Ton MAJ18HINV, and reach IQD 855,000 for the 2 Ton MAJ24HINV.
However, the correct choice should not be based on price alone.
First determine the cooling capacity required by the room. Then compare cooling output, power consumption, installation conditions and total delivered cost.
For the latest live prices, available models and specifications, use the Badia Air Conditioners collection on Toolmart as the final reference.
